Hanging a metal print without a pre-installed hanging system can be done using various methods. Here are a few options:
1. Command Strips
- Materials Needed: Heavy-duty Command Strips (suitable for the weight of your metal print)
- Steps:
- Clean the back of the metal print and the wall surface where you plan to hang it.
- Attach the Command Strips to the back of the metal print according to the package instructions.
- Press the metal print firmly against the wall to ensure a secure hold.
2. Adhesive Hooks
- Materials Needed: Strong adhesive hooks (rated for the weight of your metal print)
- Steps:
- Clean the back of the metal print and the wall.
- Attach the adhesive hooks to the wall in the desired positions.
- Hang the metal print on the hooks.
3. Mounting Tape
- Materials Needed: Double-sided mounting tape (rated for the weight of your metal print)
- Steps:
- Clean the back of the metal print and the wall surface.
- Cut the mounting tape into appropriate sizes and stick them to the back of the metal print.
- Press the metal print firmly onto the wall.
4. Drilling and Screws
- Materials Needed: Drill, screws, wall anchors (if needed), level
- Steps:
- Measure and mark the positions for the screws on the wall.
- Drill holes at the marked positions.
- Insert wall anchors if needed and screw in the screws, leaving them slightly protruding.
- Hang the metal print on the screws.
5. Picture Hanging Wire and Hooks
- Materials Needed: Picture hanging wire, D-rings or eye hooks, picture hanging hooks
- Steps:
- Attach D-rings or eye hooks to the back of the metal print using screws.
- String picture hanging wire between the D-rings or eye hooks.
- Install picture hanging hooks on the wall.
- Hang the metal print using the wire on the hooks.
Tips:
- Ensure that the weight of the metal print is within the limits of the hanging hardware you choose.
- Always follow the manufacturer’s instructions for the hanging products you use.
- If you’re unsure about the weight capacity, it’s safer to use a method that involves screws and anchors.